This order form is NOT a contractual agreement. A formal estimate/invoice will be issued after this form is submitted.
** All prices are exclusive of Taxes. Any customs duties and fees are the responsibility of the buyer.
- 30 day return policy for all items:
Day 1-15: Full refund.
Day 16-30: 10% Restocking Fee applies.
​
- Free shipping for all complete "Cine RT System Package" orders
​
- All Cine RT products are proudly made in Canada and are covered under a one year limited warranty.
Order Selection:
Cine RT System Package
Includes:
- 1 x Ultrasonic Base Sensor UBS-100
- 1 x Handset Control Unit HCU-100
- 1 x High-Bright LED Display HBD-100
- 1 x Bug Ultrasonic Transmitter BUG-100
- 1 x AC Wall Charging Unit
- 1 x USB Charging Cable
- 3 x Cine RT Mounting Blocks
- 1 x spare antennae and 4 spare mounting block screws
- 1 x Pelican 1200 Case
Price (USD): $8800
Order this item:
Additional Bug Miniature Ultrasonic Tx
Includes:
- 1 x Bug Ultrasonic Transmitter BUG-100
- 1 x USB Charging Cable
​
Price (USD): $700
​
Price if ordered with system package: $550
Order this item:
Additional High-Bright LED Display
Price (USD): $1600
​
Price if ordered with system package: $1200
Order this item:
Includes:
- 1 x High-Bright LED Display HBD-100
- 1 x AC Wall Charging Unit
​
Power Cables
Choose power cables for your Cine RT system:
​
- The Base, Handset and High-Bright Display each use a 2 pin Lemo power connection.
- The Bug Tx charges via the included USB cable.
- Standard cable lengths are: 24" (61cm) or 36" (91cm)
​
Prices:
Standard length Power Cable (24" or 36"): $125 (USD)
Charge for custom cable lengths: +$25/custom cable.
​
​
Notes:
* Connectors are marked either Straight (S) or Right-Angle (RA).
* Right Angle connectors direct the cable to the backs of all units
** Please note the following component voltage requirements: **
- CineRT Base unit (horns): 9-30 V
- CineRT Handset unit: 7-20 V
- CineRT High-Bright LED Display: 7-20V
Accordingly, 3 pin Fischer cables (24V) are recommended ONLY for the Base unit.
​
​
POWER CABLE SELECTION
Custom or additional cable notes:
Please specify custom cable specifications!
Serial Cables
- Cine RT Serial Cables contain in-line active electronics necessary to communicate with either the Preston MDR series or ARRI L-Cube/UDM lens control systems. Power to the active electronics is provided via the Cine RT Serial port.
​
The Cine RT end of the Serial Cable is a custom-keyed 6 pin LEMO connector, available in Right-Angle (RA) or Straight (S).
​
Serial Cables are available with the following 3rd party connections:
​
- Preston MDR 3/4* (connector is a straight 4 pin LEMO) - Cable price $300
​
- ARRI LCube/UDM (connector is a straight 7 pin FISCHER) - Cable price $300
​
- ARRI EXT (connector is a straight 16 pin LEMO) - Cable price $325.
​
*Preston cable will also work with the Preston MDR 2 if it has been upgraded to a 4 pin Serial port.
​
SERIAL CABLE SELECTION
Missing Cable Length!
"Y" Cables
- Cine RT "Y" Cables contain in-line active electronics necessary to communicate with either the Preston MDR series or ARRI L-Cube/UDM lens control systems as well as extra power filtration to guarantee clean power from "noisy" motor control units.
​
The Cine RT ("Y") end of the Serial Cable has two connectors: a Right Angle (RA) custom-keyed 6 pin LEMO connector & a Right Angle 2 pin LEMO power connector.
​
Serial Cables are available with the following 3rd party connections:
- Preston MDR 3/4* (connector is a straight 4 pin LEMO) - Cable price $375
- ARRI LCube/UDM (connector is a straight 7 pin FISCHER) - Cable price $375.
- ARRI EXT (connector is a straight 16 pin LEMO) - Cable price $400.
​
*Preston cable will also work with the Preston MDR 2 if it has been upgraded to a 4 pin Serial port.
"Y" CABLE SELECTION
Missing Cable Length!
Mounting Blocks
- 3 Mounting Blocks are included free of charge in the system package.
- Extra mounting blocks are $40 each
MOUNTING BLOCK SELECTION
Please select at least 3 mounting blocks (included with system package)
- 1/4" / 20 threaded
low-profile mounting block
- 3/8" threaded
low-profile mounting block
- Cinelock cradle
low-profile mounting block
- Bottom mount (1/4" & 3/8")
mounting block. (1/4" bottom mount is not visible in this picture)
Other Accessories
Noga Arm - LC9014
- Threads: 2x 1/4" -20
- Length: 3" (76mm)
- Weight: 4.5oz (120g)
Price (USD): $150
Order this item:
UHP-100 Horn Protector
- Ultrasonically transparent dust protection for your Cine RT base sensor.
Price (USD): $240
Order this item:
Thank you. Your order has been submitted!
Please ensure all highlighted fields are correctly filled in.
Please correct all errors in red before Submitting form
